🎃👻👻🎃
🕷🕸 All Products 20% OFF 🕸🕷
Only For 13 Days Code: Halloween
⏰ Time: Oct.26th - Nov.7th
Wrapping Guide
1. PVC Gloss Protective Film
2. Colloidal Scratch Resistant Coating
3. High-Grade Polymeric Vinyl
4. Low-Tack Pressure-sensitive Acrylic Adhesive
5. 160 Grams Double Side Silicone-coated Release Liner
Detail Description:
Main Functions:
The losses will occur If without car wrap
According to statistics, 70% of cars will be scratched, of which 30% choose film, and 40% choose traditional spray paint. But I have to say that the film is more economical and helps you change a variety of trendy colors.
Tips:
How do I calculate the car wrap size based on the specific model?
Measure from the most protruding position of the front bumper to the most protruding position of the rear bumper, the distance between these two points is the body length.
If you have any questions about dimensions, please contact us at 📫Service@carwraponline.com
How To Wrap - 3 Steps
Tidy up car - 1th Step
Cut car film - 2th Step
Wrap car - 3th Step
Friendly Reminder:
Recommended application tools | Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater, more wrapping pls click HERE |
Application method | Standard methods for calendered films. No overstretching and overheating and Post heating is necessary. |
Post-heating temperature | 110°C flat surfaces, 130°C curves, and overlaps |
Aftercare | PH neutral, Avoid wax or solvents |
Caution
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
Brand
Carwraponline
SKU
X8007
Size (mm)
Width: 1520±0.01% Lenth: 1800+1% (Standard roll size)
Top protected film (um)
35±2% (PET/PVC)
Surface materials (um)
110±2% (High-grade PVC-Polymeric)
Glue (um)
28±2% (High performance low initial viscosity acrylic adhesive)
Release liner (um)
170±2% (paper)/120±2% (PET)
Adhesive
Acrylic-based, reposition able, slideable
Release force (N/25mm)
0.13 (25℃ and 50%)
Initial tack (g/25mm)
903 (26℃ and 64%, GB31125-2014)
Peel Strength (N/25mm)
4.5 (25℃and 42%, GB/T2792-1998)
Holding power (h)
75.09 (25℃ and 50%, GB/T4851-1998)
Breaking strength(%)
>200%
Shelf Life
2 years(stored in +10°C to +35°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place)
Application temperature
From +15℃ to +40℃
Aging Test 1
No adhesive residue with heat(7 days under 65°C)
Aging Test 2
No adhesive residue without heat(10 days under 65°C)
Shrinkage
less than 4%
Expected durability
5-7 years
Skill level needed
Low
Weight
13-13.5Kg
How Much Vinyl is Need to Wrap Different Type of Cars.
In order to determine the amount of vinyl you need to wrap your car, you can use the following rough estimates based on the size of your vehicle:
By considering the size of your vehicle, you can use this list as a reference to gauge approximately how much vinyl you will need.
It is important to note that these estimates are rough and the actual amount of vinyl needed may vary depending on the specific dimensions and features of your car.
Be the first to recommend this product.
Name is required
Review is required