By A***e
So it was my first time using vinal wrap, I love the color and it was really great as sticking
Estimated Time OF Delivery














Brand
Carwraponline
SKU
5007
Size (mm)
Width: 1520±0.01% Lenth: 1800+1% (Standard roll size)
Top protected film (um)
35±2% (PET/PVC)
Surface materials (um)
110±2% (High-grade PVC-Polymeric)
Glue (um)
28±2% (High performance low initial viscosity acrylic adhesive)
Release liner (um)
170±2% (paper)/120±2% (PET)
Adhesive
Acrylic-based, reposition able, slideable
Release force (N/25mm)
0.13 (25℃ and 50%)
Initial tack (g/25mm)
903 (26℃ and 64%, GB31125-2014)
Peel Strength (N/25mm)
4.5 (25℃and 42%, GB/T2792-1998)
Holding power (h)
75.09 (25℃ and 50%, GB/T4851-1998)
Breaking strength(%)
>200%
Shelf Life
2 years(stored in +10°C to +35°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place)
Application temperature
From +15℃ to +40℃
Aging Test 1
No adhesive residue with heat(7 days under 65°C)
Aging Test 2
No adhesive residue without heat(10 days under 65°C)
Shrinkage
less than 4%
Expected durability
5-7 years
Skill level needed
Low
Weight
13-13.5Kg



How Much Vinyl is Need to Wrap Different Type of Cars.
In order to determine the amount of vinyl you need to wrap your car, you can use the following rough estimates based on the size of your vehicle:
By considering the size of your vehicle, you can use this list as a reference to gauge approximately how much vinyl you will need.
It is important to note that these estimates are rough and the actual amount of vinyl needed may vary depending on the specific dimensions and features of your car.
We accept order cancellations before the product is shipped or produced.
If the order is cancelled in time, you will receive a full refund.
Please note that orders cannot be cancelled once the product has been shipped.
If you are not completely satisfied with your purchase, you may return or exchange items within 15 days of receiving your package.
Please read the instructions carefully before returning any item to us.
To qualify for a return:
The item must be unused, in original condition, and in its original packaging.
Returns are not accepted for custom or personalized vinyl films unless there is a quality issue or manufacturing defect.
Contact our After-Sales Service team at Service@carwraponline.com.
Please include the following information in your email:
Your return request will be processed within 1–3 business days after we receive your email.
Once we receive and inspect the returned item, we’ll issue your refund or send a replacement within 1–3 business days.
Please contact your local post office for the actual return shipping cost. We recommend using registered airmail with tracking.
The return address will be provided via email after your application is approved.
Once your return is received and inspected, you’ll receive an email confirmation.
If approved, the refund will be processed and applied to your original payment method within 1–3 business days after we receive the returned parcel.
If you haven’t received your refund:
Recheck your bank or card account.
Contact your credit card company—sometimes posting delays occur.
Contact your bank—refunds may take additional processing time.
If you’ve done all of the above and still haven’t received your refund, please email us at Service@carwraponline.com.
Custom or personalized items cannot be returned or refunded (except for quality issues).
If the return is caused by the customer (e.g. wrong color or size ordered), the customer is responsible for return shipping costs.
If the return is due to our error (e.g. defective or incorrect item), we cover the return shipping cost.
No restocking fee will be charged on any return.
Here is the translated CarWrapOnline Installation Conditions and Guidelines in English:
Room Temperature: 25 ± 3°C
Humidity: 50 ± 5% RH
Cleanliness: Clean, dust-free, and free of visible suspended particles
Rubber squeegee
Buffer
Masking tape
Heat gun
Magnet
Gloves
IR thermometer
Spray
Towel
Installation fluid
Use the standard paint protection film installation method.
Avoid excessive stretching or heating.
Post-heating may be required:
Flat surfaces: 110°C
Curved surfaces and overlapping areas: 130°C
Maintain pH-neutral conditions.
Avoid using waxes or solvents.
Surface Preparation is Critical: Thoroughly clean the vehicle to remove dirt, wax, and grease.
Work in a Controlled Environment: Install in a dust-free, well-lit area.
Use High-Quality Installation Tools: Tools like a felt-edged squeegee, heat gun, and precision knife are essential. Avoid using sharp or metal tools that could scratch the film.
Stretch & Position Carefully: CarWrapOnline’s PPF is highly conformable, but for complex curves, use a heat gun (low-medium heat) to soften the film. Avoid overstretching, as it can thin the film.
Squeegee from the Center Outward: Start in the middle and push air/water toward the edges to prevent trapped bubbles. Apply firm, even pressure to ensure full adhesion.
Trim Excess Film Before Final Drying: Use a fresh, sharp blade for clean cuts. Leave a small margin (1-2mm) near edges to avoid peeling.
Allow Proper Curing Time: Avoid washing or heavy rain for at least 24-48 hours to allow the adhesive to fully bond.
Avoid Harsh Chemicals & Automatic Car Washes: For the first 2 weeks, only hand wash using pH-neutral car shampoo. Avoid strong solvents, waxes, or silicone-based products—they can damage the film’s hydrophobic layer.
Use Heat to Reactivate Self-Healing Properties: If minor scratches appear, park in sunlight or use warm water to activate the self-repairing top coat.
Regular Maintenance for Longevity: Use a PPF-safe detailer spray to maintain gloss and prevent contaminants from bonding. Inspect edges periodically to ensure no lifting occurs.
Keeping both the vehicle and installation environment clean is crucial to ensure the best results.
Avoid exposing the film to extreme environmental changes or chemicals immediately after installation.
The self-healing properties of the PPF can help repair minor scratches, but cannot prevent significant damage.
This is the CarWrapOnline Installation Conditions and Guidelines. Following these steps will help ensure the durability and effectiveness of the film. If you have any questions, feel free to contact our customer support team for further assistance!
By A***e
So it was my first time using vinal wrap, I love the color and it was really great as sticking
By S***o
Amazing color i highly reccomend
By P***P
The color is nice. It is very forgiving when needing to pull off and re-do in areas.
By B***s
Easy to use, turned out great.this is a great bang for your buck item. It’s takes time, patience, and a little heat. GREAT PRODUCT!
By E***n
Worked exactly as intended! Seems to be a quality product, and was pretty easy to use once you get the technique down.
By s***d
The color is very nice, my friend recommended me to buy it, I am very satisfied with the quality of this car film
By d***g
The quality of this car film store is very good, and the logistics speed is also very fast. This color is simply too cool
By V***s
Never used vinyl wrap before but turned out good. Use a heat gun and take your time.
By C***e
I have no complaints with this. It's the first wrap I have used, but it went really well. Obviously, I would recommend some practice as the first attempt was definitely the ugliest. I've had some on for a month or so now and it hasn't lifted or given me any issues yet. Patience and precision is key to making everything look good
By J***.
research the wrap you need but other than that it does its job as listed! Textured as well!